Category: Projects

Firearms Office Exterior

In this renovation of a Firearms Office in Saskatoon, SK, 8″of Wrapsulate were applied over the existing cinder block. Wrapsulate was chosen for its unique ability to deliver continuous insulation while effectively managing vapour control from the exterior. Its versatility and vapour-permeable characteristics allowed the architects to confidently improve the insulation of the existing structure […]

Carre Four Phase One

Blindside waterproofing application of Hygrothane in one of three new commercial buildings in Gatineau, Quebec. Hygrothane was applied to 25,000 square feet of walls on two different levels. Architect: Hobin Architecture General Contractor: BBL Construction Featured Product: Hygrothane

Lakeside House

This basement foundation in Niagara-On-The-Lake, Ontario was waterproofed using Hygrothane, which is an ideal choice for a hydrostatic location such as this lakeside house. The concrete portions of the foundation were also primed with SwiftSeal™ EP100 epoxy-based primer. General Contractor: EnviroTherm Solutions Featured Product: Hygrothane

Chalk River Nuclear Facility

Hygrothane applied to the foundation of a nuclear facility in Chalk River near Ottawa, ON. Hygrothane cures quickly to form a seamless membrane that completely seals the foundation wall assembly. The complete system optimizes construction schedules by eliminating the need for primers and is suitable for application in a wide range of weather conditions. General […]

1351 Paris Street Apartments

65 unit apartment building in Sudbury, ON with Wrapsulate® applied on the building exterior. R-13 Fiberglass (interior) R-21.5 Wrapsulate® c.i. (exterior)   Developer: Dalron Homes Architect: Perry Perry Architects General Contractor: TTS Spray Foam Featured Product: Wrapsulate®

200 Carriage Road Apartments

Four inches of Insulthane® Extreme applied on the interior walls of each floor across 150,000 sq. feet and 216 units. Developer: Drewlo Holdings General Contractor: Insta Insulation Featured Product: Insulthane® Extreme

Parkdale Landing

Parkdale Landing officially opened in the Fall of 2018, transforming an abandoned east-end Hamilton Tavern into 57 affordable living units with ground-floor commercial space and a community kitchen. The three-story, 4,300m² transformation became Canada’s largest retrofit Passive House project. Insulthane® Extreme closed-cell spray foam was applied over the existing brick to achieve the required R-values […]

Surrey Street Medical

Formerly The Maples Inn apartments at 25 Wellington Street in Guelph, Surrey Street Medical will offer health and medical services in a combined 42,000 sq/ft space in Guelph’s downtown core. 3.5 inches of Insulthane® Extreme (R-20) was applied to the exterior. Developer: Reids Heritage Construction Architect: BJC Architects Consultant: Durmus Group General Contractor: EcoTech Insulation […]

Palladino BMW

2 lb closed-cell spray foam on the interior and Wrapsulate® continuous insulation on the exterior. Vapour-open assembly of Wrapsulate® allows wall to dry to the exterior. Wrapsulate® is 16 Perms at 2” thickness. Wrapsulate applied at 2” on building exterior to provide Air/Water Control Layer plus R-8.6 insulating value Developer: Tribury Constructors Inc. Architect: Roch […]

Barn Restoration In Cochrane

Barn restoration project in Cochrane, Alberta. Approximately 4000 board feet of Insulthane® Extreme (R-24) was applied to the exterior roof and interior walls. General Contractor: Beyond Foam (Insulation) Featured Product: Insulthane® Extreme